Accessories & Tools
Hoses, Fittings, Manifolds, and Connections for Complete Systems
Complete an Additel calibration system with compatible hoses, fittings, adapters, manifolds, filters, and pressure connections. Tool Testing Lab can help verify compatibility before an accessory is ordered.
Products
Mini triple point of water removal tool.
Used with Additel dry well calibrators that support mini triple point of water cells.
Insert AR for ADT878-1210 Thermocouple Calibration Furnace.
Sized for Additel dry well calibrators. See the dry well datasheet for hole patterns and insert selection.
Additel ADT110 Short Probe Inserts for ADT878 - Low Temp.
Base model ADT110. Each configuration has its own Additel part number, shown as the SKU on your order.
Available configurations. 9 insert choices.
Insert A for ADT878, Low Temp.
Sized for Additel dry well calibrators. See the dry well datasheet for hole patterns and insert selection.
Insert A for ADT878, High Temp.
Sized for Additel dry well calibrators. See the dry well datasheet for hole patterns and insert selection.
Insert AR for ADT875-1210 Thermocouple Calibration Furnace.
Sized for Additel dry well calibrators. See the dry well datasheet for hole patterns and insert selection.
Additel ADT110 Short Probe Inserts for ADT875 - Low Temp.
Base model ADT110. Each configuration has its own Additel part number, shown as the SKU on your order.
Available configurations. 9 insert choices.
Insert A for ADT875, Low Temp, includes matching insulation piece.
Sized for Additel dry well calibrators. See the dry well datasheet for hole patterns and insert selection.
Insert A for ADT875, High Temp.
Sized for Additel dry well calibrators. See the dry well datasheet for hole patterns and insert selection.
Differential pressure manifold for calibration work with DP instruments.
Hand-tight quick connections throughout, no wrenches or thread tape needed. Pairs with Additel process calibrators and DP modules for differential setups.
External Pressure Manifold (with one 1/4BSP F hand-tight quick connectors).
The Additel 128 external pressure manifold expands connection options for compatible Additel calibrators. Hand-tight quick connections, no wrenches or thread tape needed.
The Additel 123 hydraulic manifold adds test ports for pressure applications up to 15,000 psi (1,000 bar).
Four hand-tight quick connectors come pre-installed, so you connect without wrenches or thread tape. Use it with calibration pumps, pressure controllers, dead weight testers, and piston gauges.
The Additel 121 pneumatic manifold adds test ports for pressure calibration up to 3,600 psi (250 bar).
A filter is built into the manifold to keep contamination from devices under test out of your system. Four hand-tight quick connectors come pre-installed, so you connect without wrenches or thread tape. Use it with calibration pumps, pressure controllers, dead weight testers, and piston gauges.
The Additel 121 pneumatic manifold adds test ports for pressure calibration up to 3,600 psi (250 bar).
A filter is built into the manifold to keep contamination from devices under test out of your system. Four hand-tight quick connectors come pre-installed, so you connect without wrenches or thread tape. Use it with calibration pumps, pressure controllers, dead weight testers, and piston gauges.
Additel ADT112 - Pneumatic Filter.
Base model ADT112. Each configuration has its own Additel part number, shown as the SKU on your order.
Available configurations. Type / Connection: (base), 761A-B, 761A-M, 761A-N, 761A-N2.
Additel ADT111 - External Pressure Manifold with zero control valve.
Base model ADT111. Each configuration has its own Additel part number, shown as the SKU on your order.
Available configurations. Type / Connection: B-KIT, B2-KIT, M-KIT, N-KIT, N2-KIT.
Contamination prevention system kit, hydraulic, with communication cable.
Connects the instrument to a PC for data transfer and software use.
Additel ADT108-KIT - Contamination prevention system kit.
Part Number: ADT108-KIT.
Additel ADT107 - External Pressure Manifold with zero control valve.
Base model ADT107. Each configuration has its own Additel part number, shown as the SKU on your order.
Available configurations. Type / Connection: B-KIT, B2-KIT, M-KIT, N-KIT, N2-KIT.
External Pressure Manifold, 70 bar (with two 1/4BSP F hand-tight quick connectors).
Adapter and Fitting, 1/4" HP male to various male and female connections (17 pc with carrying case).
The Additel 104-HP kit adapts a 1/4 HP male (Autoclave M-250-C) connection to various connectors. Designed for the Additel 949, 959, and 960 ultra high pressure pumps. Individual adapters are also available separately.
10-piece quick-connect adapter kit. Adapts a male thread to ten different female hand-tight quick connectors.
The connectors seal hand tight, no wrenches or thread tape needed. Designed for all Additel pumps except the 949. Available in 1/4 and 1/2 NPT, 1/4 and 1/2 BSP, and M20x1.5 male versions.
25-piece adapter kit with carrying case included. Adapts 1/4 NPT male to various connectors.
Designed for all Additel pumps except the 949, 959, and 960. The 1/2 NPT, 1/4 BSP, and M20x1.5 male versions are available as their own kit variants, and individual adapters are also sold separately.
Adapter, 1/4NPT male to hose barb.
Additel 100 series fittings use hand-tight quick connectors that seal without wrenches or thread tape, which keeps connection changes fast during calibration work.
Adapter, 1/2NPT male to 1/2BSP female.
Additel 100 series fittings use hand-tight quick connectors that seal without wrenches or thread tape, which keeps connection changes fast during calibration work.
Adapter, finger-tight quick connector to 1/4NPT female hand-tight quick connector.
Additel 100 series fittings use hand-tight quick connectors that seal without wrenches or thread tape, which keeps connection changes fast during calibration work.
Adapter, 1/4NPT female to M10 male finger tight connection.
Additel 100 series fittings use hand-tight quick connectors that seal without wrenches or thread tape, which keeps connection changes fast during calibration work.
Adapter, fight-tight quick connector to 1/2NPT female hand-tight quick connector.
Additel 100 series fittings use hand-tight quick connectors that seal without wrenches or thread tape, which keeps connection changes fast during calibration work.
Adapter, 1/2NPT female to M10 male finger tight connection.
Additel 100 series fittings use hand-tight quick connectors that seal without wrenches or thread tape, which keeps connection changes fast during calibration work.
Additel ADT280 100Ω Standard Reference Resistor incl four binding post adap.
Base model ADT280. Each configuration has its own Additel part number, shown as the SKU on your order.
Available configurations. Configuration: RS-100, RS-25.